Timloc Rafter Roll 6m

Rafter Roll

Designed to maintain ventilation between insulation and roofing felt to prevent the build-up of condensation. Suitable for new build and refurbishment work.

Use:

• For pitched roof eaves ventilation

• On standard pitched roofs where the pitch is 15 degrees or more and the roof void is an attic or loft space

• On roofs with rafter spacings of between 400mm and 600mm centres

Features and Benefits

• Durable, totally resistant to decay, easy to fit 

• Supplied in convenient 6m rolls 

• Suitable for new build and refurbishment project

Quality

• Satisfies all NHBC requirements 

• Manufactured to BS EN ISO 9001 and BS IN ISO 14001

• Complies with all relevant Building Regulations 

• Meets all relevant British Standards

Material and Colour

• Manufactured by vacuum forming in UPVC.

• Available in black only.

Products in the System

300mm rafter roll - Product 1121 Single row of 300mm roll panel coverage suitable for:

400mm rafter roll - Product 1171 Single row of 400mm roll panel coverage suitable for:

600mm rafter roll - Product 1131 Single row of 600mm roll panel coverage suitable for:

800mm rafter roll - Product 1151 Single row of 800mm roll panel coverage suitable for:

Installation Advice

• Unroll the ventilator along the rafters along the full length of the eaves and along both sides of the building to create a cross flow ventilation action.
• Position centrally above the wall plate. This is the narrowest part of the roof where the roof insulation is most likely to constrict the airflow.
• Push the corrugations down over the top of the rafters and secure using clout nails or staples.

Ordering Information

• Measure the overall length of the eaves to be ventilated and divide by 6m to determine the number of rolls of ventilator required.

Data Sheet

Click here for data sheet